High quality Blade paddle dryer for sewege treatment

High quality Blade Paddle Dryer for sewege treatment

Product introduction:

JYD type paddle dryer can not only be heated by shell, but also for internal rotor, which greatly increases drying area, improves heat efficiency and ensures the material is completely dry. This machine has two or more embedded rotors in the shell with jacket, and each rotor is equipped with several fan-shaped hollow blades for heating. The heating medium enters the hollow rotary shaft and blade through the rotary joint installed at the end of the rotary shaft. After the heat transfer is dried, the condensate is discharged from the machine through the rotary joint. The equipment has the following characteristics:

1.1 Low energy consumption: because of indirect heating, there is no large amount of air to take away heat. The outer wall of the dryer is equipped with jacket and insulation layer. For slurry materials, evaporation of 1kg water only requires 1.1-1.3 kg saturated steam.

1.2 The cost of the pulp dryer system is low: the multi axes are embedded together, the heat transfer area is large and the equipment size is small.

1.3 Wide range of drying materials: different heat media are used to dry both heat sensitive materials and materials requiring high temperature treatment. The common media are: saturated water vapor, heat transfer oil, hot water, etc. It can be operated continuously or intermittently, and can be applied in many fields.

1.4 Low operating cost: simple structure and low maintenance cost.

1.5 The equipment has simple structure, few vulnerable parts and stable operation.

Main technical parameters of the product:

Products show: